Demonstration film

Click on the films to see how easy the Conflux heating system works and can be used.


Conflux 1

The film below illustrates what a Conflux PTC heater is and what it beneficially can be used for.





This second film illustrates in more detail how a Conflux heater works. It shows a thermal image of the process when 0°C aluminium pieces (black) are placed on Conflux heater (orange). The heater only produces heat where needed, and only as long as is needed. The film on the top shows a thermal image of the process. The film at the bottom shows the current to the heater, i.e. the heating power produced by the heater.



Conflux 2



The third film compares a Conflux heater with a convetional flexible heater. It shows a thermal image of the two heaters (Conflux on the left and a conventional heater on the right) and illustrates the process when cold aluminium pieces (black) are placed on the two heaters. The film on the top shows a thermal image of the process. The film at the bottom shows the current to the heater, i.e. the heating power produced by the heater. The Conflux heater only produces heat where needed, and only as long as is needed. This is seen as an instant increase in current when the cold piece is placed on the heater which then gradually decreases as the piece heats up. The conventional heater continues to produce the same amount of heat regardless of if th epiece is there or not, and hence heating up the piece more slowly.



Conflux 3



You can see additional demonstration films produced by our partner Minco Inc. Minco offer self-limiting heaters based on Conflux' unique material under the brand SmartHeat SLT.



SmartHeat SLT



Contact us for more information!

Please contact us on info@conflux.se or phone +46 8 83 45 20.